Toyota Hilux GD6 2016-2025 Big Country Zambezi Single Drawer + Fridge Slider Platform

Toyota Hilux GD6 2016–2025 Big Country Zambezi Single Drawer + Fridge Slider Platform

Smart Storage. Easy Access. Built for the Hilux.

Upgrade your Toyota Hilux GD6 2016–2025 with the Big Country Zambezi Single Drawer + Slider, a practical load-bin storage system combining a full-length lockable drawer on the left with a heavy-duty sliding platform on the right.

Designed for demanding 4×4, touring, overlanding, work and everyday use, the system keeps recovery gear, tools, camping equipment and other essentials organised while providing a dedicated platform for securing additional equipment such as a fridge.

The system is vehicle-specific and is listed by HJM for the Toyota Hilux GD6 2016+.

Key Features

• Big Country Zambezi Single Drawer + Slider
• Toyota Hilux GD6 / Revo application
• 2016–2025
• Single full-length drawer on the left-hand side
• Heavy-duty sliding platform on the right-hand side
• Lockable drawer with keys
• Heavy-duty telescopic drawer sliders
• Heavy-duty telescopic platform sliders
• Removable left-hand side trim panel
• Access to useful wheel-arch storage
• Carpeted drawer interior
• Carpeted top surface
• Black powder-coated finish
• Aluminium slatted sliding platform
• M8 T-slots throughout the slider
• Designed for securing touring and load-bin equipment
• Fridge-compatible platform configuration
• Vehicle-specific mounting
• Built for dusty, rough and off-road environments

Single Drawer Storage

The left-hand drawer provides a dedicated, lockable storage area for equipment that would otherwise move around the load bin.

The drawer is carpeted inside and on top to help reduce rattling and protect equipment from damage caused by chafing and vibration on rough roads.

The drawer runs on heavy-duty telescopic sliders and has a 150 kg evenly distributed load capacity according to the current Big Country product specification.

Heavy-Duty Sliding Platform

The right-hand side incorporates a heavy-duty sliding platform designed to make larger equipment easier to access.

The platform uses aluminium slats with integrated M8 T-slots, allowing compatible tie-down points and accessories to be mounted directly to the platform.

The current Big Country specification gives the half-slider a 100 kg evenly distributed load capacity.

The slider can be particularly useful for:

• Fridge setups
• Storage boxes
• Camping equipment
• Recovery equipment
• Work equipment
• Toolboxes
• Outdoor equipment

Fridge Setup

The sliding platform provides a practical location for a fridge installation and makes accessing the fridge easier without having to climb into the load bin.

A compatible fridge slider can be mounted to the platform where required.

Fridge slider and fridge are additional products unless specifically included in the quotation.

When requesting a quotation for a fridge setup, please specify:

• Fridge brand
• Fridge model
• Fridge dimensions – Length × Width × Height
• Preferred fridge position

This allows the correct fridge slider and mounting configuration to be confirmed.

Wheel-Arch Storage

The left-hand side incorporates a removable trim panel that provides access to additional storage space around the wheel arch.

This makes use of otherwise difficult-to-access space and is particularly useful for touring and overland builds where available load-bin space needs to be maximised.

Built for Rough Conditions

The Zambezi Single Drawer + Slider is designed for use where dust, vibration and rough terrain are part of everyday driving.

The drawer is carpeted internally and on top, while the heavy-duty sliding systems are designed for regular use in demanding environments.

This makes the system suitable for both work and recreation, from daily load management to long-distance 4×4 travel.

Drawer

External Drawer Dimensions:

• Width: 476 mm
• Length: 1400 mm
• Height: 275 mm

Internal Drawer Dimensions:

• Width: 430 mm
• Length: 1350 mm
• Depth: 225 mm

Slider Platform

Internal Platform Dimensions:

• Width: 500 mm
• Length: 1400 mm
• Depth: 120 mm

The current Big Country specification also states that the slider floor adds approximately 50 mm of elevation to the load bay.

Load Capacity

Drawer

150 kg – evenly distributed

Sliding Platform

100 kg – evenly distributed

These are the manufacturer’s current product capacities.

The drawer and slider capacities are not the same as the Toyota Hilux’s vehicle payload.

The combined weight of the drawer system, fridge, fridge slider, canopy, passengers, tools, recovery equipment and all other accessories must remain within the vehicle manufacturer’s permitted payload and axle-load limits.

Construction

The Big Country Zambezi Single Drawer + Slider uses a combination of:

Drawer

• Galvanised sheet steel
• 12 mm carpeted Superwood
• 720 g ribbed carpet
• 180 g trunk liner
• Heavy-duty telescopic sliders

Sliding Platform

• Powder-coated mild-steel frame
• Powder-coated aluminium slatted base
• Heavy-duty telescopic sliders
• Integrated M8 T-slot mounting channels

The system is finished in black for a rugged appearance and to complement the Hilux load-bin environment.

Ideal For

The Big Country Zambezi Single Drawer + Slider is suited to Hilux owners using their vehicles for:

• 4×4 Touring
• Overlanding
• Camping
• Hunting
• Farming
• Game Farm Travel
• Safari
• Lodge Operations
• Gravel Roads
• Remote-Area Travel
• Work & Utility
• Recovery Equipment
• Long-Distance Travel
• Fleet Applications
• Everyday Load Management

Fridge & Touring Build

The single-drawer configuration is particularly useful for customers who want to retain more open load-bin space while still having dedicated storage.

A typical touring setup can combine:

Left: Lockable storage drawer
Right: Fridge / equipment sliding platform
Top: Additional carpeted load surface

This provides a practical alternative to installing two full-width drawers where the vehicle owner still needs flexible open load-bin space.

Important Fitment Information

HJM currently lists this product as:

Toyota Hilux GD6 2016+ Big Country Zambezi Single Drawer + Slider

HJM’s current product page provides year selections from 2016 through 2024, while the current Big Country product is listed for the Toyota Hilux Revo GD6 Double Cab. For a 2025 vehicle, exact fitment should therefore be confirmed before ordering.

Please provide:

• Exact Hilux year
• Double Cab / Extra Cab / Single Cab
• Exact model and derivative
• Load-bin liner
• Canopy
• Roller shutter
• Tonneau cover
• Sports bar or roll bar
• Existing fridge slide
• Existing load-bin flooring
• Other load-bin modifications

Important – Existing Load-Bin Accessories

If your vehicle already has a canopy, roller shutter, tonneau cover, sports bar, roll bar, load-bin liner, fridge slide, flooring or other aftermarket load-bin equipment fitted, please specify this in the order notes when requesting a quotation or placing your order.

Existing accessories may affect available space, mounting points, clearance and the final installation configuration.

Important – Cab Configuration

The current Big Country manufacturer page identifies this exact product as the Toyota Hilux Revo GD6 Double Cabapplication.

Please confirm your Hilux cab configuration before ordering.

Do not assume the Double Cab configuration will fit an Extra Cab or Single Cab without confirmation.

Supply & Fit HJM Offroad

Available for Supply & Fit through HJM Offroad Johannesburg or Cape Town, South Africa.

HJM can also assist with the wider Hilux touring and overland setup, including:

• Fridges
• Fridge sliders
• Canopies
• Roller shutters
• Roof racks
• Rooftop tents
• Recovery equipment
• Suspension
• Underbody protection
• Load-bin accessories

South African Specification Vehicles Only.

Please provide the exact vehicle year, derivative, cab configuration and existing load-bin accessories when requesting a quotation.

Image for illustrative purposes only. Vehicle shown is for display purposes and may not represent the exact product, vehicle specification or final fitment. Actual product appearance and fitment may vary.