Dr Artex Earth (2.0mm) Iridium (Medium) (10sh 75×50) Sound Dampening

Thin sealer used for creating enclosed acoustic spaces in the doors. High adhesion properties of this material make it ideal for complex surfaces in the door compartment.
Recommended for and high-end audiophile cars and mobile audio competitions.

COMPOSITION
This product is two-layer sandwich consisting of thin layer of vibration-damping mastic with aluminum foil.

APPLICATION
This material should installed on clean, dry surfaces, including on complex surfaces. (WARNING: Not to be installed on corroded metal surfaces!)

First clean the surface from dirt, it is recommended to use water with neutral detergents, which do not contain organic solvents and alkali. After surface dries, degrease it with white spirit, gasoline or other solvents and allow dry completely.
Peel off the anti-adhesive paper and thoroughly press against the surface, avoiding the formation of air bubbles between the surface and the material. Roll the material with a roller, pressing it through so that there is no air trapped between the material and the surface (use the “from the center to the edge” technique ). It is best to apply the material in working environments with temperatures between 18 and 35°С.

Recommended application: Creation of enclosed spaces in the doors